40%OFF-Reusable Anti-Lippage Tile Leveling System (50 Pcs/ Pack)
Unit price/ per
Want to be able to lay tiles like a PRO and get that FLAWLESS finish? Well, you need this Reusable Anti-Lippage Tile Leveling System which EASILY lay PERFECT titles on any DIY project. As a DIYer, tiling is one of those projects that is VERY difficult toreplicate the work of a true artisan/professional.There are lippage and general unevenness, and ultimately you will end up hating the work you did.
However, that is NO MORE! If you are working on remodeling your bathroom, shower, kitchen or basement, this tool is a total MUST. Even professionals can use these toSPEED up their work. No more tapping and excessive thinset to make everything lineup. This system is COMPLETELY foolproof and SAVES time, stress, guesswork, and money. Perfect for amateurs and even professionals
Prevents tiles from Moving while Curing- You can lay tile like a PROFESSIONAL.All of your lineups will be completely FLAWLESSand everything will be100% level within all four sides of the tile.
Reusable Tool-The Tile Leveling System is REUSABLEso you can do ALL of your projects. Suitable for 3mm to 25mm thickness of the tile, suitable for tile gap 2mm.
Gross weight: 560g
Net weight: 550g
50 x Reusable Anti-Lippage Tile Leveling System
1 xSpecial Wrench
Customer questions & answers:
1.Question：How do you remove it if the mortar sets up?
Answer：Before the cement or tile glue has completely dried up (usually no more than 6 hours), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees so that the T-pin turns to a zigzag parallel to the tile, and remove the leveler.
2.Question：How are you supposed to remove these before 6 hrs, if you can't walk on the tile for 12 to 24 hours after laying it?
Answer：A skilled decorator should know that the general tile can be stepped in the middle after 6 hours, but be careful to step on it. thank you very much.
3.Question：what thickness tile do these work on?
Answer：You can use these levelers in a max thickness of tile is 1/2 in. This will give you enough room to drop the tee below the tile and tighten. It will not work on anything thicker than 1/2 inch.